RCF has introduced the NXL 24-A, a full-range active column loudspeaker array with four 6-inch woofers and a 2.5-inch voice coil compression driver.
The new ND 640 driver is at the core of the design, loaded from a waveguide to a horn with 100-degree constant horizontal directivity and 30-degree asymmetrical vertical directivity to achieve a consistent field coverage.
The amplifier delivers 1,400 watts (1,000 watts LF and 400 watts HF) and is controlled by a DSP that takes care of crossover, equalization, phase alignment, soft limiting and loudspeaker protections. Equalization is available to operate with a single column or in pairs.
Using the FLY LINK KIT NXL 24-A, it’s possible to fly two NXL24-A in HF close coupling configuration with a choice of three possible angles: 0, 15, 20 degrees. The NXL 24-A can also be pole-mounted.
The new generation DSP handles all processing within the cabinet and allows adjustment for a single column application or HF close coupling application. Connectors are Powercon.
—131 dB max SPL
—65 Hz to 20 kHz frequency response
—4 x 6-inch woofers
—2.5-inch voice coil C. Driver on waveguide
—100- x 30-degree slightly tilted pattern control
—DSP controlled input section
—Pole mountable, stackable, flyable
—Baltic birch plywood enclosure
—Internal structural metal bracings
The NXL24-A will begin shipping in the U.S. in late October 2013.