Sign up for ProSoundWeb newsletters
Subscribe today!

Forums Presented By: 
Rane Upgrades HAL3 Digital Processor To New HAL3s
+- Print Email Share RSS RSS

Rane has upgraded the HAL3 digital signal processor with the release of the new HAL3s, which offers 10 dB better dynamic range and adds Rane’s mic/line/line-plus input stages that support a dynamic microphone, condenser mic, balanced line input, or automatically monoed stereo unbalanced inputs.

Also added is another RAD port, making the HAL3s a 6-input, 10-output, 100 percent drag and drop device.

With Halogen 4.1’s customizable HTML web controls for iPad or smart phone control, the HAL3s widens applications solutions when more sources, zones and/or I/O matrixes are needed in house of worship, retail, zoned, paging, corporate AV and background music systems.

HAL3s Overview:

—DSP contains 2400 MIPS of processing power

—Ethernet 1000BASE-T with Zeroconf service discovery protocol for easy set up

—Two analog mic/line-plus inputs on Euroblock connectors (green area). Mic/line-plus Inputs accept a balanced line, or mono left and right unbalanced lines, configured in Halogen software

—Six analog balanced line outputs on Euroblock connectors (orange area)

—Front panel signal and overload indicators for all inputs and outputs

—Two RAD Ports, each Port 2 in x 2 out plus control channel (blue areas). RJ-45 shielded Cat-5e connections up to 150 meters (500 feet)

—Four digital remote ports (brown and blue areas) [DR can connect to RAD port]. RJ-45 shielded Cat-5e connections up to 300 meters (1,000 feet)

—Four logic inputs on mini-Euroblock 6-pin connectors (gray area)

—Internal passive pull-up

—Unit size: 1U, 1.75 H x 19 W x 8.25 D (inches)

—Unit Weight: 5 pounds

image

 

Rane


Commenting is not available in this weblog entry.