TransAudio Group Introducing Drawmer DS101 500 Series Noise Gate At 2013 NAMM

January 22, 2013, by PSW Staff

transaudio group

TransAudio Group will introduce the Drawmer DS101, the first noise gate module designed specifically for the 500 Series rack system, at this week’s 2013 NAMM Show in Anaheim (booth 6945).

The new DS101 is based on a single channel of the company’s renowned DS201 and incorporates the fully variable high- and low-pass filters and “key listen” monitoring functionality pioneered by Drawmer that enable frequency conscious gating.

The DS101, which can be used for both gating and “ducking” (for voice-over applications or the elimination of unwanted transient artifacts), incorporates comprehensive envelope controls — threshold, attack, hold, decay and range — plus a host of other features, including Drawmer’s “traffic light” metering.

The module’s low-noise circuitry also incorporates Drawmer’s proprietary hysteresis or “trigger stabilization,” which prevents “chatter” around the threshold level.

When installed next to each other in a 500 Series rack, two or more DS101 gates may be linked using Drawmer’s new infrared triggering mechanism.

Linked in this fashion, the envelope shaping capabilities of any number of DS101 gates (up to a maximum 10 units in a single rack enclosure) may be independently adjusted while the trigger pulse passes through unchanged. This enables the user to achieve an almost limitless range of “envelope follower” effects.

The DS101 additionally allows external triggering via a front panel 1/4-inch key input connector.

U.S. MSRP for the Drawmer DS101 is $449.

TransAudio Group is the U.S. distributor of Drawmer signal processing products.

TransAudio Group



Return to articleReturn to article
TransAudio Group Introducing Drawmer DS101 500 Series Noise Gate At 2013 NAMM
http://www.prosoundweb.com/article/transaudio_group_introducing_drawmer_ds101_500_series_noise_gate_at_2013_na