June 16, 2014, by PSW Staff
At this week’s InfoComm 2014 show in Las Vegas Powersoft is highlighting the new X Series of power amplifiers, which incorporate a system of channel routing, truly universal mono, bi- and three-phase balancing power supply, and a fully-featured DSP.
The X Series consists of two models. The larger X8 offers eight channels in a 2RU chassis, while the X4 features four channels in a single rack unit. Both models share the same power density, being capable of delivering up to 5,200 watts at 2 ohms per channel.
The X Series natively supports AES3, two redundant Audinate Dante digital streams and analog inputs, providing up to four different selectable input sources per channel.
“By focusing on quality and innovation, Powersoft has built a reputation and tradition, for its high performance amplifiers,” states Lee Ellison, CEO of Audinate. “Coupled with the market leading Dante networking option, the new Powersoft X Series amplifier builds on Powersoft’s rich tradition of great solutions for the AV industry.”
Suitable for both low and high impedance applications, the Powersoft X8 and X4 are equally suitable for concert touring and professional fixed installations. The modular construction permits the rear input/output connections to feature either XLR/speakON or Phoenix connectors, depending on the requirement of the specific application.
“The philosophy behind the X Series is to permit the audio system to operate independently from the power mains available at the venue and to allow even smaller racks to be brought to run the show,” explains Luca Giorgi, Pro Audio Business Unit Director at Powersoft. “This brings us even closer to complete integration of the system and provides an unmatched level of control over the behaviour of both the audio and power source.”
The universal power supply has worldwide AC acceptance and allows direct connection to any regional power line configuration.
The power supply is now suitable for single-phase, bi-phase or three-phase operation from 85 volts AC up to 440 volts AC without the need for manual selection. True three-phase load balancing is directly achievable by the unit without any complex load assignment in the power distribution system design.
Neutral connection is not necessary, given the capability of the unit to work in delta connection on three-phase systems. The power supply also features full Power Factor Correction as well as Powersoft’s patented Smart Rails Management technology, ensuring that the X Series runs as cool and efficiently as is currently possible.
“Our sights have been fixed firmly on the future during the design of the X Series,” states Claudio Lastrucci, Powersoft R&D director, “We looked at what we believe amplifiers will require for the next 10 years and made a platform capable of meeting these needs as well as building in a certain level of ‘future proof’ expandability.”
The reliability of the power supplies and the fully protected circuit design guarantee high sustained power to any and all of the output channels of Powersoft X Series amplifiers.
Managing power with Powersoft X4 and X8 is easy thanks to the integrated, low-latency DSP as well as a complete routing and mixing of the input/output channels. Signal management and processing architecture on the Powersoft X Series is composed of six separate sections: input source selection, input processing; matrix, pre-output processing, speaker routing, and output processing.
The set-up parameters of the Powersoft X Series are fully integrated into Armonía Pro Audio Suite, which offers an intuitive interface for parameter adjustment, a comprehensive control over the digital audio processing and complete real-time monitoring of the system performance.
An integrated WiFi connection permits the Powersoft X Series to be accessed and managed via any smartphone or tablet through a user interface specifically developed for local monitoring.