Powersoft Debuts X Series Amplifiers To U.S. Market

June 26, 2014, by PSW Staff

image

Powersoft showcased the new X Series amplifier to the U.S. market at the recent InfoComm show in Las Vegas. The X Series was on display along with other notable products from the Italian manufacturer.

The X Series amplifier takes power amplification to new heights by providing tremendous functionality typically only found in separate outboard units. System integration tools include channel routing, a truly universal mono, bi- and three-phase balancing power supply and a revolutionary fully-featured DSP.

The larger X8 unit boasts eight channels in a 2U chassis, while the X4 features four channels in a single rack unit. Both models share the same power density, being capable of delivering up to 5200W @ 2 ohms per channel. Natively supporting AES3, two redundant Dante™ by Audinate® digital streams and analog inputs, provide up to four different selectable input sources per channel. 

Powersoft also presented the award winning Ottocanali 12K4 8-channel amplifier in 2RU package. The new member of the Ottocanali family is the only product on the market that implements dual redundant power supplies, allowing great efficiency and reliability. In addition, the dual power supply setup grants flawless worldwide operation with any AC voltage.

In addition, Powersoft highlighted the K10 DSP + AESOP amplifier – one of the most versatile products in the K Series – during the show. Ideal for subwoofers and high-power, full-range systems, the K10 provides 12000W per 2 output channels. It is extremely stable down to 2 ohms making it simple to minimize the number of amps required to power a specific system. Due to remarkably high efficiency exceeding 85%, the vast power density delivers top performance despite running off a single mains phase, while occupying only a single rack unit.

DEVA, the popular multifunctional device, was also at the Powersoft booth. DEVA is a patented self-contained multifunctional multimedia device for installation anywhere without the need for cables and with virtually zero installation costs. It integrates solar power, bi-directional WiFi 802.11n A/V communication, audio, camera, microphone, lighting and a Class D amplifier with an 8-inch speaker in a compact, lightweight and weatherproof enclosure rated IP65. DEVA is suited to a wide range of applications, from background music to paging, in combination with video and/or audio.

Various amp modules have been also used to emphasize Powersoft’s ‘heartbeat’ design in the form of the DigiMod 3004PFC4 + DSP4, DigiMod 2004PFC2, the 4-channel D-Cell504 and LiteMod.

Foremost among these the LiteMod is a powerful 2-channel switching mode amplifier modules, delivering up to 800W per channel or 1200W in bridge mode, with a flexible platform designed to fit into active monitors, two way loudspeakers and small/medium subwoofers. Capable of impressive sonic performance, with the highest dynamic range and lowest distortion, LiteMod provides clean output power at high volume, thanks to the latest generation compact PFC power supply, guaranteeing reliability and consistency in all operating conditions and low power consumption (less than 0.55W in standby). A dedicated optional DSP board can be easily plugged into the module providing a complete solution in a compact package.

The M-Force moving magnet linear motor transducer was also on display in Las Vegas. With respect to conventional transducers, M-Force requires less power from the amplifier to produce a higher sound pressure levels (SPL) with extremely low levels of distortion. Unlike conventional loudspeakers, M-Force is a genuine push-pull engine where the magnetic field interacts in a linear fashion to provide a controlled force to the moving elements.

The transducer is completely free of moving electrical conductors which in turn maximizes the efficiency and reliability of the whole system. The extremely high motor strength, typically one order of magnitude above conventional technologies, yields to a natural, controlled sound and negligible power compression at the highest sound levels. The extreme displacement capabilities allow an increase in SPL in function of the size ratio of the cabinet design. By merging the unique parameters of the transducer and the amplifier output stage, the system provides unmatched sonic performance and efficiency.

 

Powersoft

 



Return to articleReturn to article
Powersoft Debuts X Series Amplifiers To U.S. Market
http://www.prosoundweb.com/article/powersoft_debuts_x_series_amplifiers_to_u.s._market