Sign up for ProSoundWeb newsletters
Subscribe today!

Peavey Debuts Expansion Modules For Powered Loudspeakers
+- Print Email Share RSS RSS

New Peavey Expansion Modules expand the capabilities of the company’s EU Series, Impulse 12D, and the new PVXp powered loudspeakers.

The new 9-Band Graphic EQ Expansion Module aids users in controlling feedback using the built-in, proprietary FLS Feedback Location System, which makes accurate feedback elimination simple and intuitive.

The 9-Band module gives users greater control over shaping and accenting live or recorded vocals and live instruments, as well as increases control over general sound equalization, and removes 60 Hz AC hum.

Meanwhile, the new 3-Band Parametric EQ Expansion Module provides fine-tuning capabilities with gain, frequency and bandwidth (Q) control.

Finally, the new 3-Channel Mixer Expansion Module expands the powered enclosure’s input options by three input channels, with each channel featuring level control, high and low equalization control, and a combination XLR and 1/4-inch input.

9-Band Graphic EQ Expansion Module specifics:
—Nine frequency bands: 63, 125, 250, 500, 2k, 4k, 8k, 16kHz
—FLS Feedback Locating System
—+/- 15 dB boost and cut
—U.S. MSRP $59.99

3-Band Parametric EQ Expansion Module specifics
—Three frequency bands: Low 40 to 800Hz; Mid 200 to 4kHz; High 1kHz to 20kHz
—+/- 12 dB boost and cut on each frequency band
—Q adjustable from 0.1 to 1 on each frequency band
—Hard-wire bypass
—U.S. MSRP $49.99

3-Channel Mixer Expansion Module specifics
—Three channels of additional inputs
—Combination XLR female and ¼” TRS input
—Microphone and line-level input range
—Two-band EQ on each channel
—Switchable phantom power global for all three channels
—U.S. MSRP $79.99

The new Peavey Expansion Modules for powered loudspeakers are made in the USA will be available in Q2 2012 from authorized retailers.

Peavey


Commenting is not available in this weblog entry.