Sign up for ProSoundWeb newsletters
Subscribe today!

Forums Presented By: 
One Systems Introducing Portable Outdoor Presentation System (POPS) At 2010 InfoComm
Enclosures, electronics, components and accessories designed for inclement weather conditions
+- Print Email Share Comments (2) RSS RSS

See PSW’s comprehensive 2010 InfoComm coverage..

One Systems is introducing the Powered Outdoor Presentation System (POPS), a self-powered portable PS system, at the 2010 InfoComm show in Las Vegas, booth C7706.

POPS is comprised of the POPS15, a bi-amplified 15-inch two-way system, and the POPSSub, a powered 18-inch subwoofer. POPS incorporates built-in amplifiers and digital signal processing from Powersoft Audio.

All POPS enclosures, electronics, components and accessories have been designed for use in inclement weather conditions.

POPS15 houses premium-quality loudspeaker components, including a narrow-profile15-inch woofer with a 4-inch (101.6 mm) voice coil, a large-format compression driver and a high-Q 60-degree by 40-degree constant-directivity horn capable of delivering medium to long-throw coverage.

The POPS15 Powersoft amplifier is specified as delivering 3,000 watts of bi-amplified class D power with full onboard digital signal processing featuring high-order filtering and crossover functions, free-field optimized equalization plus system dynamics and protection algorithms.

The enclosure is injection-molded from a special resin designed to withstand rough weather and ultra-violet exposure. All of rigging components and the 3-layer grille are made of high-grade stainless steel.

POPS15 can also be flown or suspended for permanent installation via built-in M10 fly points and a selection of optional hardware pieces for suspension or arraying.

POPSSub is designed to augment the low-end response of POPS and in combination with POPS15, creates a digitally-controlled, 5,000-watt tri-amplified sound system.

It utilizes an 18-inch (457 mm) woofer with a large-format 4-inch (101.6 mm) voice coil powered by a 2,000-watt Powersoft class D amplifier.

POPSSub has an optimally-vented enclosure with large-diameter pneumatic wheels that allow the POPSSub and POPS15 combination to be easily moved across muddy sports fields and large grassy areas.

The enclosure is constructed from heavily-braced, 18-mm marine-grade birch plywood that is painted with wear and weather-resistant polyurethane and is equipped with a 3-layer high-grade stainless steel grille and rigging hardware.

It has been designed to IEC 529/IP 45 ingress protection standards and its transducers, electronic switches and input/output connections are designed to meet weather/waterproof requirements.

POPSSub also comes with a height-adjustable, crank-up loudspeaker mounting pole for elevating the POPS15 above its audience. POPS15 and POPSSub each come with a 100-foot AC main cable and a special IP67-rated 3-pin XLR signal cable that are each supplied on portable cable reels for fast system setup, easier transportation and safe operation.

image

One Systems Website


Comments (2) Most recent displayed first
Posted by which professor would you recommend for powered sp  on  11/07/11  at  10:06 PM
Iv'e got a pair of apogee apl-800 tops and apl 12 for my bottoms(base). Which processor would you recommend for the above mentioned speakers. Looking foward to your response.

Sgn. Dj Mike.

Commenting is not available in this weblog entry.