For those of us who toiled over faders back when the earth was still cooling, the concept of gain structure was fairly easy to grasp.
Each separate box was a link in the audio chain, visibly connected via patch cables, and analog distortion was easy to hear and identify.
In today’s all-digital, all-in-the-box world, it’s not that simple. Signal paths can be unconventional and convoluted, and digital distortion can be subtle and sneaky.
But while the dawn of the DAW has fundamentally changed the way we make records, proper gain structure is no less critical to good recording. The user-friendly, forgiving design of computer audio programs can make it all too easy to overlook a poorly-thought-out signal chain, and the results can sneak up and bite you.
Everything To Gain
From its initial capture to its place in the final mix, a signal in a typical recording chain travels through a multitude of stages or devices. Each of these devices, whether “real” hardware or software plug-ins, needs to receive an optimal signal level at its input; not enough level can add noise, while too much can cause clipping and distortion.
Keeping an eye on the input and output levels of every plug-in in the chain can ensure that each device’s output feeds a clean signal to the next device’s input.
Other than channel inserts, most plug-ins’ input levels are controlled via the mixer’s effects send, as well as the plug-in’s own input level control. Matching the mixer’s send level with the plug-in’s input level is key to proper gain structure.
Sending too low a level to the effects buss and then turning up the plug-in’s input level to compensate will result in a noisier signal. Conversely, sending too hot an effects send level and then turning down the plug-in’s input level will result in a distorted signal.
Generally speaking, unity gain is the goal. With some exceptions (most notably compressors and other dynamics processors), a good rule of thumb when building your gain structure is to try and achieve the same peak level whether the plug-in is inserted into the signal chain or not. If your signal level is noticeably higher or lower when you bypass the device, it’s a good idea to examine your gain structure.