d&b audiotechnik has introduced the Ti-Series, a collection of loudspeaker systems and hardware fittings specially targeted to address an extremely wide range of small- to medium-sized installation applications.

The new Ti-Series is outfitted with many of the innovative technology developments featured in the company’s T-Series loudspeakers.

The series comprises the Ti10L line array loudspeaker and Ti10P point source loudspeaker, with the Ti subwoofer completing the package.

The unobtrusive rigging hardware allows aesthetic integration, whether ground supported or flown and there is the option to color coordinate both the system and rigging to suit visual requirements.

The Ti10 cabinet has the same dimensions for both loudspeaker versions (470/18.5 x 197/7.8 x 300/11.8 mm/in) and is a passive 2-way design that houses two 6.5-inch drivers, a 1.4-inch-exit HF compression driver.

At the core of the design is a unique combination of a rotatable horn, achieved without the use of any tools, coupled with an acoustic lens within the loudspeaker grill assembly.

The HF driver is fitted to a waveguide horn producing vertical line source directivity with a 90-degree horizontal pattern, the acoustic lens widens this to 105 degrees for line array applications.

Rotation of the horn by 90 degrees relative to the lens produces an accurate Ti10 point source dispersion transforming a vertically oriented Ti10 into a stand-alone full range loudspeaker with 90-degree horizontal and 35-degree vertical directivity pattern.

While the Ti10L loudspeaker is deployed in multiples as elements of line arrays, incorporates appropriate rigging and maintains horizontal constant directivity down to approximately 600 Hz, the Ti10P loudspeaker is used as a point source stand-alone cabinet without the line array hardware. The vertical directivity control extends approximately one octave lower than similarly sized biaxial loudspeakers.

The Ti-SUB shares the same width and integrated rigging hardware as the Ti10L for deployment either flown at the top of a Ti10L array or as a separate column. It can also be ground stacked for use with either of the
Ti10 loudspeaker versions.

The Ti-SUB increases the low frequency headroom and extends the bandwidth of a Ti10 column down to 47 Hz. The bass-reflex design utilizes a high excursion 15-inch driver with a neodymium magnet assembly
and employs d&b SenseDrive technology when driven by the D12 amplifier.

Ti loudspeaker systems can be driven by either the d&b D6 or D12 power amplifiers which are specially designed and manufactured by d&b utilizing digital signal processing and include switchable functions for precisely tailoring system response for a wide variety of applications.

Between them, they provide two different power ranges, incorporate d&b loudspeaker specific configuration information and have analog and digital signal inputs and links.  Both amplifiers have d&b Remote network interfaces enabling control and monitoring of the system functions and extensive system integration capabilities.

d&b audiotechnik Website