Crown Audio will be offering an online seminar, “Installation Applications for the PIP-USP4 Processing Module,” on March 24 at 10:00 a.m. and 4:00 p.m. Eastern Standard Time, and on March 25 at 1:00 p.m. Eastern Standard Time.
The seminar, presented by Crown’s Director of Application Engineering, Bradford Benn, will cover the features and applications of the PIP-USP4.
The Crown PIP-USP4 is a fourth generation DSP PIP (Programmable Input Processor) input module for CTs Series two channel amplifiers. The USP4 connects to an Ethernet network allowing it to be remotely controlled and monitored via Harman HiQnet System Architect.
In addition, the USP4 allows the transport of real-time digital audio via CobraNet or AES.
Please go to the seminar page to register for the class. Attendees will be automatically registered for a chance to win a Crown XLS 1000 amplifier.
The free seminar will cover the following features of the module including:
FIR and IIR filters
LevelMAX peak, RMS
Input routing options
Analog routing options
Ambient Leveling using attached loudspeakers
Speaker line monitoring options
The USP4 is a HiQnet series component and connects to the audio control/monitor network using Ethernet hardware.
CobraNet audio is available over the same 100Mb Ethernet network, providing a simple to install, single cable solution for audio distribution, control, and monitoring.
Crown Audio Website