Crosby, Stills, & Nash Tour With DiGiCo
On a tour that has venues ranging from sheds to arenas, the D5 is easily coping with a wide range of audience sizes and severe temperature fluctuation.
+- Print Email Share Comments (1) RSS RSS

Despite having been through more ups and downs than virtually any other band, 1960s folk-rock legends Crosby, Stills & Nash are still touring.

They are currently mid-way through an extensive tour, which has taken in a wide variety of venues and festivals throughout the US and Europe.

Helping the band to win over more admirers on every tour is Front of House engineer Kevin Madigan with his DiGiCo D5.

“The D5 is my console of choice, I’ve been using DiGiCo for about five years and there’s still no better digital console in my opinion,” said Kevin.

“I sometimes have to use other consoles on a one-off basis, but I always come back to my favorite because of its excellent sound quality and layout.”

The tour is using a d&b J Line main system, with J-subs and B2s. Kevin sends left, right and sub outputs from the D5.

All processing is done within the D5, except for Manley ELOP electro-optical limiters on vocal inserts and a Manley Variable Mu over the L-R outputs. “I don’t have to use them, but I love them,” said Kevin.

With venues ranging from theatres to arenas, sheds and open air festivals, the DiGiCo console is easily coping with a wide range of audience sizes.

On this tour it’s not having to cope with extremes of temperature, but that is something Kevin has seen the D5 take in its stride, too.

“I’ve used DiGiCo consoles on a tour leg which took place during a freezing cold winter in Canada,” he said.

“I had to wait while the metal control surface warmed up to room temperature, it having just come off the truck after a few nights in temperatures below 5ºF but it worked absolutely fine - and should I ever have an issue, no company provides better technical backup than DiGiCo.”

With the shows receiving universally positive reviews, the D5’s audio quality is letting CS&N’s famous vocal harmonies sit perfectly in the mix, giving audiences plenty of shiver-down-the-spine moments.

“It’s great when the audiences appreciate the sound, but the best thing is actually when they say nothing,” said Kevin. “If the FoH sound just becomes part of the music, that’s great.”

image

DiGiCo Website


Comment (1)
Posted by Bruce  on  09/26/10  at  07:57 AM
I went to the show In Jax Fl, last night and I'm sorry but that sound was harsh and basically bad. the mix would have been decent but it was muddy as hell, and the vocals were just piercing harsh, Stills guitar was to loud the first 30 minutes of the show, it was just horrible. I guess the system engineer could be blamed for the muddiness because I seen his eq and it match the analyzer, I mean what the hell is up with putting so much 60 to 150 boost, just simply gross, but the FOH guy was just lazy on the board, just slow, and his eq settings for the vocals were just HARSH, did I say that enough. Okay just my rant after wasting so much money to see a show that usually is a great sounding venue.
Commenting is not available in this weblog entry.