Encourage Relationships
To do its work well, a sound crew must work in harmony with musicians and presenters.

All too often there’s friction between sound technicians and performing artists. Some of that could be eased organizationally by including sound technicians in the church’s fine arts or music ministry.

The lead person of the technical team would report directly to the worship leader or minister of music—no one else. They would work things out, striving for communication and harmony.

Example: I saw how that could work at a recent sound seminar. David Sheets, minister of music at Central Wesleyan Church, Holland, Michigan, and his worship team participated in a session I led titled “Mixing a Worship Team: A Live Demonstration.”

We purposefully had no rehearsal or sound check before the seminar. We merely tested the inputs to make sure they were working.

During the seminar, a conflict arose between the piano and synthesizer players. The synthesizer player wanted more synth in the monitor, and the piano player wanted less. The problem: they were sharing a monitor mix.

David let me know about the problem, and I told the players that since there were no more monitor mixes available, they should work out a solution together. He led the players through a quick trial on the monitor until the players reached agreement. They reached harmony in less than three minutes.

Tip: The key was David’s willingness to tell me about the problem, and the opportunity I had to explain the setup limitations to the players.

I’ve discovered that when technical people are given the opportunity to explain a problem, performers are very cooperative.

Of course, technicians must never abuse that trust by blaming their mistakes or ignorance on equipment, or by refusing to listen to a musician who needs adjustments in a monitor.

Trust can also be destroyed by performers or technicians whose egos get in the way of working with others. In the sound booth or in front of a mike, the motto should be: “Check your ego at the door.”

I also know how important a good relationship can be between a technician and artist. I spent four years working with Jack Lynn, a worship leader. We had such rapport that we could communicate from sound booth to platform via hand signals.

When Jack put two hands on the mike, I knew I had to put more piano level in the monitor. Two hands with a raised index finger meant he wanted more voice. A step back from the monitor meant it was too loud.

The signals worked well because I kept my eyes on the platform, and Lynn always made eye contact before signaling.

Serve Others First
If we serve others first, we have far less friction between sound technicians and performers. Here are some ways sound people can serve others to enhance their ministry to the church:

Show up early to set the sound equipment with enough time left to pray with speakers and singers before a service.

Provide little extras for platform participants, such as a glass of fresh, cold water near the lectern. Take the pastor and/or worship leader out to lunch in appreciation for their support. Tell them how much you value their contribution.

Explain to singers or speakers what you’re doing to adjust their sound and why. For example, tell them you’re moving a monitor two feet to the left so that the sound from the monitor is in the non-pickup area of the microphone and will thus give them a purer sound with less risk of feedback.

The Ultimate Goal
The sound ministry is like custodial service. When it’s done well, few will notice. When done poorly, everyone will notice.

Work as a respectful team, and you’ll find that your sound is consistently excellent, and you’ll have a great time to boot!

Gary Zandstra is a professional AV systems integrator and has been involved with sound at his church for more than 25 years.

More PSW Church Sound articles by Gary Zandstra:
Maximize Your Mix: A Step-By-Step Guide Through A Mixing Console
Testing Cables Is Essential To Solid Church Sound System Performance
Two Simple Yet Vital Tools Of The Trade For Church Sound Operators

Page 4 of 4
Previous  « First < 2 3 4