There are times when you didn’t learn the right way to mix a vocal or an instrument or a band. That’s OK. You learned. You moved on.
But then there are the lies you tell yourself over and over. You don’t learn. You can’t move on. Your work suffers. WAKE UP!*
*Any judgment on my part is because I’ve believed some myself. I don’t live in a glass house…at least not anymore.
#1: I can always boost the volume. The singer is moving the microphone from their lips to their stomach and then somewhere in between. Poor microphone usage techniques cannot be overcome by boosting the volume and accompanying massive fader riding. You must talk with the singer or go through the worship leader so they can be trained in proper microphone usage.
And you know you can only boost a volume so much until their volume either feeds back or their mic is just too far away from their mouth. Spend the time, all of two minutes, and show them how to hold the microphone.
#2: I can cover up the problem with reverb. Reverb isn’t for masking audio problems…not entirely. Before you bring in any type of audio effect such as reverb or delay, fix the frequency problems with some EQ work. Otherwise, you are only “reverbing” those bad frequencies.
#3: This is the way I’ve always done it. This is the lie that because you learned to do something one way that it can’t be improved. It can go for microphone positioning, the use of effects, how you mix, etc.
Believing this lie holds you back from improving your mix, improving your relationships with the crew and congregation, and ultimately holds you back from being the best you can be.
#4: I know what’s best. Similar to #3, you believe your knowledge and experience trumps everyone else. Some of my best mixing techniques came from hearing the question “do you mind if I show you a few tips on mixing this band” and giving a response of “yes.”
I’m not saying you have to accept what everyone says. We know everyone has their opinion about mixing but you do have to be willing to listen because you will learn something.
#5: Compressors can’t do that. Let’s ask this question, “do you know what your equipment is capable of doing?” Are you sure about that? I recall having a discussion with a couple of techs about a problem that had occurred when some people had “borrowed” the sanctuary for use for an event with a band.
Apparently, they had a really odd audio problem where all sorts of bad audio was coming out of the system – weird feedback, odd sounds and all. Three of us were standing around talking about it, discussing the possible problems because we learned the gain structure was set properly, and two of us said it sounded like the compressor settings were messed up. (In fact, we learned they were). Another guy looked at us like we were idiots and said “a compressor can’t do that.”
Don’t be close minded about what your equipment can or can’t do, especially when something is going wrong.