Sign up for ProSoundWeb newsletters
Subscribe today!

Beyma Launches New MC500 Family Of Woofers At Prolight+Sound
+- Print Email Share RSS RSS

Beyma has introduced the new MC500 family of ferrite-magnet woofers, available in 10-, 12-, and 15-inch sizes, primarily designed for active loudspeaker systems and line arrays as mid-range or low-frequency components.

All three models—10MC500, 12MC500 and 15 MC500—incorporate 2.5-inch voice coils with ceramic magnet as well as Maltcross technology, Beyma’s propietary cooling system, which allows them to handle up to 1,000 watts of program power while dramatically reducing loss due to power compression effect.

Further, MC500 models offering large displacement (8mm Xmax) while remaining very sensitive and linear in a wide band (above 97 dB 1w/1m).

Key specs for the 10MC500:

Nominal impedance—8 ohm
Minimum impedance—5.7 ohm
Power capacity—500 W AES
Program power—1000 W
Sensitivity—97 dB 1 W @ 1 m @ ZN
Frequency range —60-5000 Hz
Voice coil diameter—63.5 mm 2.5 in
BL factor—18.2 N/A
Moving mass—0.044 kg
Winding length—19.5 mm
Air gap height—9.5 mm
Xdamage pp—40 mm
Total weight—13.42 pounds


With Live Sound, You Can Make Anyone Sound Good

A free subscription to Live Sound International is your key to successful sound management on any scale — from a single microphone to a stadium concert. Written by professionals for professionals, each issue delivers essential information on the latest products specs, technologies, practices and theory.
Whether you’re a house monitor engineer, technical director, system technician, sound company owner, installer or consultant, Live Sound International is the best source to keep you tuned in to the latest pro audio world. Subscribe today…it’s FREE!!

Commenting is not available in this weblog entry.

Audio Central