Sign up for ProSoundWeb newsletters
Subscribe today!

Forums Presented By: 
Behringer Releases EUROCOM AX Series Amplifier Control Software
+- Print Email Share RSS RSS

Control software now available for Behringer EUROCOM AX Series of amplifiers

Related Tags

Behringer has announce that the new EUROCOM AX Series Amplifier Control Software is available for immediate download. (Get it here.)

AX Remote Connect V1.1 provides the ability for integrators to set up, control and monitor all EUROCOM AX Series DSP models with a local PC via the front panel USB connector, or remotely over a network via the rear panel Ethernet port.

A convenient front panel LCD display also allows setup and adjustments directly at the amplifier, no PC required.

Additionally, AX Remote Connect V1.1 allows full access to the AX Series’ onboard test section, which includes pink noise, white noise and a fixed/sweeping sine wave generator. This allows the installer to verify system operation without the need to connect an external source generator or use the AX series amplifier as a powerful sound masking processor.

Software Features:

—Plug and play PC Remote Editor Software for AX DSP Series running on the following systems: Windows XP, Windows Vista, Windows 7 (32-bit and 64-bit)

—Plug and Play connectivity over USB

—Graphic control over all DSP parameters

—Realtime, on-screen Input and Output metering

—Precise I/O Level Control via 22 virtual LED indicators

—Graphical feedback for Filter/Crossover, Parametric EQ and Dynamic EQ (level dependent equalization)

—System can be locked to restrict unauthorized access, a must for contractors and rental companies

—Access to Limiters, Delays, EQ, Crossover and Dynamic EQ

—Store and recall settings in 20 Preset Locations

—Name amplifiers and presets for simple recall

Download AX Remote Connect V1.1 here.

The MUSIC Group

Commenting is not available in this weblog entry.