The CX-212 is the latest addition to the Audix line-up of large diaphragm condenser microphones.
Equipped with a choice of cardioids, omni, and figure-8 patterns, the CX-212 is a multi-functional microphone that can be utilized for a wide variety of recording applications.
At the heart of the CX-212 is a dual 1.07 inch diaphragm, custom tensioned to provide exceptionally consistent and accurate results every time.
With a wide band frequency response from 30 Hz – 20 kHz, the CX-212 is ideally suited to capture the nuances of acoustic instruments, voices, sound effects, or room ambience. The addition of a bass roll-off filter provides the additional ability to control unwanted ultra-low frequencies at the source of the capsule , where it is most effective.
The CX-212 is characterized with an open mesh grill which, in addition to providing protection to the capsule, helps to minimize reflections and refractions of incoming signals.
A heavy duty isolation shockmount system is included, allowing the CX-212 to be used securely in any position and be free of shock and vibration.
Audix VP of Sales Cliff Castle states, “The CX-212 is a natural outgrowth from one of our current microphones that has become very popular - the CX-112.
“During the past year while the CX-212 was in the development stages, we had the big advantage of working with the CX-212 in our own recording studio at Audix. We found the omni pattern particularly useful for vocals, both lead and ensemble.
“The CX-212 provides a rich, full-bodied and natural sound and we ended up using the omni position much more than we imagined we would, and it is easy to understand why many recording engineers get their signature sound from using omni-directional microphones. Being intimately familiar with the performance of the CX-212, we are confident that artists and engineers are going to love this mic!”
The Figure-8 (bi-directional) pattern is a very useful feature in that it is comparable to getting two microphones in a single source.
In the Figure-8 mode, for example, CX-212 may be utilized to mic a string section in an orchestra or as an “area” mic on a stage, or to simply get a different perspective for a recording. With two CX-212 microphones, one can use any number of stereo recording techniques, including MS (mid-side) which requires one of the patterns to be Figure 8.
The CX-212 is available from authorized Audix dealers at a suggested retail price of $599, or in matched pairs for $1,349. Included are shockmount, carrying pouch, and one-year warranty.
Transducer Principle: Condenser
Pickup Pattern: Cardioid – Omni – Figure 8
Sensitivity: 15.8 mV /Pascal @ 1k
Frequency Range: 30 Hz - 20 kHz
Impedance: 200 ohms balanced
Self-Noise: 18 dB A weighted
Maximum SPL: > 128 dB (with -10 pad engaged)
Power Requirements: 48 volts (+/- 4 volts) phantom power
Housing/Finish: Zinc die cast, black e-coat