Sign up for ProSoundWeb newsletters
Subscribe today!

Adamson Introduces a Built-in Pole Mount Socket for Metrix Sub
The Adamson Metrix Sub, officially introduced at the AES show in October 2007 now comes standard with a built in pole mount socket for use with Metrix Wave-t’s pole mount kit.
+- Print Email Share Comments (0) RSS RSS

Toronto, Ontario (January 29, 2008): The Adamson Metrix Sub, officially introduced at the AES show in October 2007 now comes standard with a built in pole mount socket for use with Metrix Wave-t’s pole mount kit. It is designed for use with one or two of Adamson’s 15 degree Metrix Wave-t enclosures providing 120 degree horizontal by up to 30 degree vertical coverage. The pole mount supports 3 different positions for the bottom Wave enclosure: -5 degree, -10 degree, -15 degree and can be mounted on top of a ground stack of Metrix Subs, or used independently with a stand. The Metrix AIR Rigging system on the Wave enclosure allows three positions; 10, 13, and 15 degrees.

The Metrix Sub-t, a compact convertible cardioid sub, boasting two new 15-inch ND15S Neodymium Kevlar drivers, is flyable within the main array or behind the array using two light weight–t series aluminium rigging frames and a frame link adapter when trim heights are limited. The Metrix-i series sub is a non flyable option for installations requiring only pole mount or stacking applications.

For more information visit www.adamsonproaudio.com.


Viewed 7376 times.

Commenting is not available in this weblog entry.